Filter
Top Products
DCP Operation
3-553920-A2-GN31-30 November 1996
To
access the T
est branch from the Top-Level menu, make the following selections:
F1
Leased:28.8
Control Test
F2
F3
Press the
key until T
est appears. Select T
est.
Abort
Abort ends any test that is in progress and brings the modem back to the normal mode of
operation. Confirmation is provided by the Command Complete
message.
To access Abort from the Test branch, make the following selection:
F1
Test: >
Abort Self
F2
F3
Select Abort.
F1
Test:Abort
Command Complete
F2
F3
The modem stops all tests currently in progress and displays the
Command Complete
status
message on the LCD.
To exit this function and remain in the T
est branch, press the
key
. To exit and return to the
Top-Level menu, press the
key
.