Paradyne 3921PLUS Network Card User Manual


 
DCP Operation
3-233920-A2-GN31-30 November 1996
F1
VF Counter Clear
Command Complete
F2
F3
The
message
Command Complete appears on the LCD’s bottom line indicating the VF Counters
are cleared.
T
o exit VF and remain in the Status Branch, press the
key
. To exit and return to the Top-Level
menu, press the
key
.
Identity
Identity displays the modem’
s serial number
, model number, firmware revision level, hardware
revision number and firmware part number. Retrieval of this information is useful if you are
purchasing additional or replacement modems and/or making firmware upgrades.
To access Identity from the Status branch, make the following selection:
F1
Status:
VF Identity
F2
F3
Press the
key until Identity appears. Select Identity.
F1
Status:Identity >
Ser#=00000000
F2
F3
The modem’s serial number appears on the LCD’
s bottom line. Press the
key to scroll and
view the model number, firmware revision level, hardware part number, and firmware part number.
Ser #
Serial number is an 8-digit number that identifies the modem.
Mod # Model number is an alphanumeric number that identifies the modem as
either a Model 3920
Plus or Model 3921Plus modem.
FRev Firmware revision level is an alphanumeric number that identifies the level
of firmware loaded in the modem.
HPt # Hardware part number is an 11-digit number that identifies the circuit card in
the modem.
FPt # Firmware part number is an 11-digit number that identifies to service
personnel the firmware release number.
Country Country code is a 7-text character that identifies the current country code.
To exit the Identity function and remain in the Status branch, press the
key
. To exit and return
to the Top-Level menu, press the
key
.