Filter
Top Products
2. Using the Asynchronous Terminal Interface
2-8
February 2001 8784-A2-GB20-30
Switching Between Screen Work Areas
Select Ctrl-a to switch between the two screen areas.
Procedure
To access the screen function area below the dotted line:
1. Press Ctrl-a to switch from the screen area to the function keys.
2. Enter the designated (underlined) character for the function key or press the
Tab key until you reach the desired function key.
Example:
To save the current options, type
s
or
S
(Save).
3. Press Enter. The function is performed.
4. To return to the screen area above the dotted line, press Ctrl-a again.
main/config/network Hotwire
Slot: 4 Model: 8784
Port: 2
NETWORK INTERFACE OPTIONS
Margin Threshold: –3db
Excessive Error Rate Threshold: 1E–5
AutoRate: Disable
DSL Line Rate: 1552
Circuit Identifier: Clear
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit