Filter
Top Products
8784-A2-GB20-30 February 2001
B-1
B
Standards Compliance for SNMP Traps
SNMP Traps
This section describes the unit's compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following traps:
warmStart
authenticationFailure
linkUp and linkDown
warmStart
authenticationFailure
SNMP Trap Description Possible Cause
warmStart The unit has reinitialized
itself.
The trap is sent after the unit
resets and stabilizes.
There are no
variable-bindings.
Reset command.
Power disruption.
SNMP Trap Description Possible Cause
authenticationFailure Failed attempts to access the
unit.
There are no
variable-bindings.
Three unsuccessful attempts
were made to enter a correct
login/password combination.