Filter
Top Products
3. Initial Startup and Configuration
3-10
February 2001 8784-A2-GB20-30
AutoRate Feature
The AutoRate feature is designed to find the best rate possible for your DSL loop
conditions. After the DSL loop is up, configure the unit for a fixed rate. AutoRate
can be enabled or disabled from the Network Interface Options screen and reset
from the Control menu.
Disabling AutoRate
The AutoRate function is controlled from the Network Interface Options screen and
allows you to enable or disable AutoRate. The AutoRate option is only available if
the unit is configured as an LTU.
To access the Network Interface screen, follow this menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Network
The AutoRate option defaults to Enable.
Procedure
To disable AutoRate:
1. Position the cursor in the AutoRate field and press the spacebar.
The AutoRate field toggles to Disable and the DSL Line Rate field appears.
2. Enter a DSL Line Rate and press Enter.
main/config/network Hotwire
Slot: 4 Model: 8784
Port: 1
NETWORK INTERFACE OPTIONS
Margin Threshold: –3db
Excessive Error Rate Threshold: 1E–5
AutoRate Disable
DSL Line Rate 1552
Circuit Identifier: Clear
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save