Filter
Top Products
A. Configuration Options
A-18
February 2001 8784-A2-GB20-30
Enterprise Specific Traps
Possible Settings:
Enable,
Disable
Default Setting:
Disable
Determines if SNMP traps are generated for enterprise-specific events.
Enable
– SNMP traps are generated for
enterpriseSpecific
events.
NOTE: Refer to
Enterprise-Specific Traps
in Appendix B,
Standards Compliance for
SNMP Traps.
Disable
– No enterprise-specific event traps are sent.
Link Traps
Possible Settings:
Disable, Up, Down,
Both
Default Setting:
Both
Determines if SNMP traps are generated for link up and link down for one of the
communication interfaces.
Disable
– No
linkUp
or
linkDown
SNMP traps are generated.
Up
– A
linkUp
trap is generated when the unit recognizes that one of the communication
interfaces is operational.
Down
– A
linkDown
trap is generated when the unit recognizes a failure in one of the
communication interfaces.
Both
– Sends trap messages for detection of both
linkUp
and
linkDown
.
NOTE: Refer to
linkUp and linkDown
in Appendix B,
Standards Compliance for SNMP
Traps
.
Link Traps Interfaces
Possible Settings:
Network, DSX-1,
All
Default Setting:
All
Determines if the SNMP
linkUp
, SNMP
linkDown
, and interface-related
enterpriseSpecific
traps are generated for the network DSL interface and/or DSX-1 interface (DTE).
Network
– SNMP trap messages are generated for the DSL network interface.
DSX-1
– SNMP trap messages are generated for the DSX-1 interface.
All
– SNMP trap messages are generated for the DSL network interface, COM port, and
DSX-1 interface.
Table A-8. SNMP Trap Options (2 of 2)