Filter
Top Products
3. Initial Startup and Configuration
3-8
February 2001 8784-A2-GB20-30
Downloading Firmware
The Download Code screen allows you to download firmware from a TFTP server.
To access the Download Code screen, follow this menu selection sequence:
Main Menu
→
Control
→
Download Code
Procedure
To download firmware:
1. Position the cursor in the Image File Name field. Type the name of the file to
be downloaded.
The file name may be a regular path name expression of directory names
separated by a forward slash (/) ending with the file name. The total path name
length can be up to 128 characters.
2. Position the cursor in the TFTP Server IP Address field. Enter the TFTP server
IP address.
The first three digits of the IP address cannot be 000 or greater than 223.
3. Position the cursor in the Destination field. Use the spacebar to select a
network destination for the TFTP server.
4. Position the cursor in the Immediately Apply Download field. If you would like
the download to be effective immediately, select
Yes
.
main/control/download_code Hotwire
Slot: 4 Model: 8784
DOWNLOAD CODE
Image File Name: Clear
TFTP Server IP Address: 000.000.000.000 Clear
Destination: DSL1
Immediately Apply Download: No
Start Transfer: Yes
Packets Sent: 0000000
Packets Received: 0000000
Bytes Sent: 0000000
Bytes Received: 0000000
Transfer Status: Transfer Pending
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit