Filter
Top Products
3. Initial Startup and Configuration
8784-A2-GB20-30 February 2001
3-3
Procedure
To change Identity information:
1. Position the cursor in the System Name field. Enter a name unique in your
network to identify the SNMP managed node (or unit).
2. Position the cursor in the System Location field. Enter the physical location of
the unit.
3. Position the cursor in the System Contact field. Enter the name and contact
information for the person responsible for the unit.
4. Press Ctrl-a to switch to the function key and message key area below the
dotted line.
5. Select S
ave and press Enter.
Configuring the Unit
Configuration option settings determine how the termination unit operates. Use the
Configuration menus to select, display, or change configuration option settings.
The unit is shipped with factory settings that match the options and settings in the
Default Factory Configuration area.
To display configuration options, follow this menu selection sequence:
Main Menu
→
Configuration (Load Configuration From)
main/configuration Hotwire
Slot: 4 Model: 8784
LOAD CONFIGURATION FROM:
Current Configuration
Configuration Loader
Default Factory Configuration
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit