Filter
Top Products
10 • IP T1/E1 DACS Administrators’ Reference Guide
66 Routing Information
Routing Information
The IP Routing Information window (see figure 24) displays information required to route IP datagrams,
including the IP address, subnet mask, next-hop router, and interface for each network interface defined in the
DACS.
The IP Routing Information window also has a link to the O/S forwarding table where the forwarding param-
eters are displayed (“O/S forwarding table window” on page 68).
Figure 24. IP Routing Information window
Destination (ipRouteDest)
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple
routes to a single destination can appear in the table, but access to such multiple entries is dependent on the
table-access mechanisms defined by the network management protocol in use.
To view or modify next-hop routing information for each destination, click on a destination link in the
Desti-
nation
column. For more information about modifying next-hop routing information settings, refer to “IP
Routing Destination window” on page 70.