Filter
Top Products
34 C2904M-B (2/05)
CONFIGURATION PAGE FOR GENERAL SETTINGS
The unit identification, password, date and time, timer server, and software update settings, as well as version information, comprise the
General Settings configuration page.
All units have a real-time clock set during manufacture. However, time and date can be changed any time; for example, when the units are
operated in different time zones.
Version numbers for the hardware and firmware are for information only. Whenever you need technical support, have these numbers ready.
Figure 26. Configuration Page for General Settings
NOTE: When changing any configuration item in one of the following pages, make sure to change a single item at a time. Then click the
respective Set button. If more than one item needs to be changed, execute the procedure repeatedly. If more than one item is changed
without clicking the Set button in between, only the entry associated with the clicked button is actually changed. All other entries return
to their previous settings.
All configuration items are stored in non-volatile memory so they are kept when the unit is powered down.
Some configurations apply only to transmitters (for example, camera settings) while others apply to receivers. All settings not expressly
restricted to certain models apply to all.