Filter
Top Products
50 C2904M-B (2/05)
WEB BROWSER CONTROL PAGES
ACCESSING THESE PAGES
1. To access the PelcoNet NET4001 transmission system home page, you must first connect to the Internet/intranet network and open
Internet Explorer (the browser).
2. Then, enter the default address 192.168.0.1 in the address box. If this address has been changed, enter the application address. The
home page appears.
3. Click Control to access the Device Controls page.
4. The Device Controls page has underlined links to the control pages. To access, click one.
Figure 38. Device Controls Page
CONTROLLING THE DISPLAY
The live video control pages include representations of keys that let you control various functions (in addition to showing the camera
display). Use the mouse pointer and click the left mouse button to enable options and operate controls on the screen. Click outside the
options to disable a radio button or selection button.
Live video pages let you choose the size of the video viewing area. Click either 352x288 (small) or 704x576 (large) in the Resize Video
field.
Live video pages also let you record and play back camera views on a PC’s hard drive. Refer to the
Record and Play Back the Display on a
PC
section for details.
On the Spectra and Esprit live video control pages, you can control the following:
• Presets –To program a preset: position the camera, click the Set check box, and then click a preset number button.
To activate a preset: click a preset number button.
• Patterns – You can program only one pattern through PelcoNet. To program a pattern: click the Set check box, then click Start, and
then use the arrow buttons to position the camera. Click Stop to halt pattern programming.
To operate a pattern: click Start to begin the pattern and Stop to halt.
• Programming Menus – To access the programming menus: click the Set check box, and then click the 95 button. Use the open iris
icon to open menus and set options. Use the open iris icon in conjunction with the Exit option to move backward through menu
layers and to exit programming mode.