Filter
Top Products
installation of the bracket, the camera data cable (G) must be connected to the camera body and
pulled toward ceiling.
(6) Power Adapter installation: The power adapter may be placed in a convenient spot near the camera.
Make sure none of the cables (either the AC cable or the DC cable) are stretched tight. Do not
connect the power adapter output cable to the 4” adapter cable at this time.
(7) Connect the camera cable (G) to the camera body.
(8) Connect the output connector of the AC adapter (H) to the 4” power adapter cable.
(9) Insert the three camera body holders (L) to the holes of the suspension bracket and turn the body
clock-wise to fasten. Attach it with the included M3 screw (M).
VersaCam IC-360 User’s Guide
58