Pioneer AVIC-X920BT Computer Drive User Manual


 
Displaying the Navi
Settings screen
1 Press the HOME button to display the
Top Menuscreen.
2 Touch [Settings].
The Settings Menuscreen appears.
p This can also be operated using the Short-
cut Menuscreen.
3 Touch [Navi Settings].
The Navi Settingsmenu appears.
4 Touch the item that you want to
change the setting.
# Touch .
Returns the previous screen.
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.
1 Display the Navi Settings screen.
= For details, refer to Displaying the Navi
Settingsscreen on this page.
2 Touch [Connection Status].
The GPS Statusscreen appears.
2
3
4
5
1
1 Speed Pulse
The Speed Pulse value detected by the navi-
gation system is shown. 0is shown while
the vehicle is stationary.
2 GPS Antenna
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
Color
Signal com-
munication
Used inposi-
tioning
Orange Yes Yes
Yellow Yes No
p When the GPS antenna is connected to
this navigation system, OKis dis-
played.
When the GPS antenna is not con-
nected to this navigation system, NOK
is displayed.
p If reception is poor, pleasechange the
installation position of the GPS antenna.
3 Parking Brake
When the parking brake is applied, Onis
displayed. When the parking brake is re-
leased, Offis displayed.
4 Illumination
When the headlights or small lamps of a ve-
hicle are on, Onis displayed. When the
small lamps of a vehicle are off, Offis dis-
played. (If the orange/white lead is not con-
nected, Offappears.)
5 Back Signal
En
148
Chapter
31
Customizing preferences