Filter
Top Products
SV60890 Rev. G 9-11
DM500™and DM550™ Digital Mailing System Operating Guide
Cleaning or
Replacing the
Wick
continued
13. Remove the moistener tank and
hold it as high as you can above
the machine as shown in the
picture on the right.
Hold it in this position for ap-
proximately 20 seconds.
a. Replace the moistener tank
again and gently slide it back
into the machine, taking care
not to crimp the supply tub-
ing. Do not push the tank all
the way back into the ma-
chine yet.
b. Wait about 5 minutes and
then check the level of E-
Z Seal® Sealing Solution
again as described in step
12 above.
14. Once you verify that the moistener tank is filled to the correct level with
E-Z Seal
®
Solution, gently push the tank all the way back to its original
position.
c. If the tank is still not filled
to the correct level, re-
move the moistener tank
and drain it over the front
of the machine, then re-
place the tank and check
the level again after 5
minutes.