Filter
Top Products
5-30 SV60890 Rev. G
5 • Mailing System Setup
Setting
Auto-Enter
You can set up your system so that after it scans in a barcode value and
displays it on the IntelliLink® Control Center screen, it requires you to
press the Enter key to accept that value. You can do this if you want to be
sure that an operator verifies that the correct barcode has been scanned.
By default, the system will automatically enter the value as soon as it
scans in the barcode.
To require you to press Enter to accept each scan:
1. Press the Menu key on the control center, then select Set Up.
2. Press the down arrow key and then select Barcode Scanner.
3. At the "Barcode Scanner Setup" menu, select Auto-enter.
4. Select Off to disable the Auto-enter. This will now require you to manu-
ally press the Enter key after each scan.