Filter
Top Products
SV60890 Rev. G 4-13
DM500™ and DM550™ Digital Mailing System Operating Guide
Use this mode if you just want to seal the envelopes and do not want to
apply postage.
1. Press the Mode key.
2. Select Seal Menu - No Printing and select the appropriate option.
3. Select the Reset Counter option if you want to clear the number of
pieces of mail fed into the machine in the seal only mode.
4. Place the mail on the feed deck.
5. Press the Start key.
NOTE: For additional sealing options, press the Seal key on the IntelliLink
Control Center. This allows you to select the following options:
• Sealer on (seal envelopes)
• Sealer off
• Seal only, don’t print
Mode Selection:
Seal Only
To select a Print Permit:
1. From the IntelliLink® Control Center, press the Mode key.
2. Select Print Permit. The “Print Permit Selection” screen appears.
3. Select the permit you want and press Enter.
4. Place the mail on the feed deck.
5. Press the Start key.