Filter
Top Products
SV60890 Rev. G 3-3
DM500™ and DM550™ Digital Mailing System Operating Guide
3. Adjust the side guide so it is
close to, but not touching, the
bottom edge of the envelope
stack.
Be sure and leave a slight
clearance between the side
guide and envelopes (about
1/16 inch clearance).
Side Guide
4. Adjust the thickness adjustment knob to ad-
just for envelope thickness. For thicker piec-
es of mail (3/8” to 5/8”), or mail containing
several inserts, use the thick mail setting.
For mail containing only single inserts, or for
postcards, use the normal mail setting. Re-
fer to the figure on the right.
To pick a setting, turn the knob to the arrow
located on the feed cover.
5. Make sure you have sufficient funds in your
postage meter. If the message “Low Funds”
appears on the screen, make sure you can
complete the mail run with the funds you
have. If you do not have enough funds, see
Chapter 6, Adding Postage in this guide.
Thick mail setting
Normal mail setting
Running the
Mail
1. Press the Mode key on the IntelliLink® Control Center.
2. Select Key In Postage.
3. Key in the correct postage value using the numeric keys on the control
center, then press the Enter key.
4. Place the piece of mail on the feed deck and press the Start key.