Filter
Top Products
6-8
6 • System Settings
SV61983 Rev. G
Setting/Disabling the Lock Code
The lock code prevents unauthorized access to your system after the
machine has been powered up and/or has entered sleep mode.
1. Press Menu.
2. Use the Review keys to scroll to "Change Setup" and press En-
ter/yes.
3. Use the Review keys to scroll to "Use lock code setup?" and
press Enter/yes. If you have already established a lock code,
you are prompted to enter the lock code at this point. Key in the
four-digit code and press Enter/yes.
4. Use the Review keys to scroll to:
Turn On Lock Code - Press Enter/yes at "Set a Lock Code?"
prompt.
Type in a four-digit code and press Enter/yes. Re-enter
the same code to confirm. A message confirms your choice.
This option forces the entry of the lock code when the machine
is powered on or after awakening the machine when the system
was put in sleep mode after pressing Lock.
Change Lock Code - Press Enter/yes at "Change Lock Code?"
prompt. Key in a new four-digit code and press Enter/yes. Re-
enter the same code to confirm. A message confirms your choice.
Setting for Lock on Sleep - Press Enter/yes at "Change setting
for "Lock on Sleep"? prompt. At the prompt to "Lock on Sleep:",
choosing "Yes" forces the entry of the lock code when the ma-
chine is awakened after a time-out induced sleep mode.
Turn Off Lock Code - Press Enter/yes at "Turn Lock OFF?"
prompt. A message confirms your choice.
5. When prompted to stay in setup, press No to return to main screen.
i
NOTE: If you have set up a password for an account when using
the optional accounting feature (see Chapter 7, Standard Ac-
counting Option), you can enter the account password instead
of the lock code password to gain access to the machine. If you
do this, however, certain features are not accessible, such as
the postage refill feature; and Change Accounts, Accounting
Functions and Change setup within the menu. See Appendix A
- Passwords and Meter Functions, for information on the effects
on system functions when gaining access to the machine by en-
tering the lock code password versus the accounting password.