Filter
Top Products
6-9
6 • System Settings
SV61983 Rev. G
Setting Sleep Mode Activation Time
You can set the amount of time the machine waits until entering
"sleep mode". When the machine is in sleep mode, the display is
blank (except for the time in the lower right) and you can't process
mail. You awaken the machine by merely pressing any button on the
control panel.
i
NOTE: If you have set up the lock code option to activate on
sleep mode (see previous section), you will need to enter a lock
code to awaken the machine.
1. Press Menu.
2. Use the Review keys to scroll to "Change Setup" and press Enter/
yes.
3. Use the Review keys to scroll to "Change sleep timeout?" and
press Enter/yes.
4. Key in the desired amount of time (in minutes, from 1 - 20) the
machine should be idle before the sleep mode activates and press
Enter/yes. A message confirms your choices.
5. When prompted to stay in setup, press No to return to main screen
Activating Sleep Mode Manually
You can put the machine into "sleep mode" at any time. When the
machine is in sleep mode, the display is blank (except for the time in
the lower right) and you can't process mail. You awaken the machine
by merely pressing any button on the control panel.
1. Press Lock.
2. At prompt to set system to sleep mode, press Enter/yes. The
machine enters sleep mode.
3. Press any button on the control panel to awaken the
machine.
i
NOTE: If you have enabled the lock code option to activate
on sleep mode (see earlier topic), you will be prompted to
enter the lock code to awaken the machine. Key in the four-
digit code and press Enter/yes. The available funds amount
displays before returning to the main screen.