Filter
Top Products
9-5
9 • Ink Installation and Maintenance
SV61983 Rev. G
Replacing the Print Head
IMPORTANT:
This procedure should only be done under the direction or with the
permission of a Pitney Bowes representative.
1. Press Menu.
2. Use the Review keys to scroll to "Use ink functions?" and press
Enter/yes.
3. Use the Review keys to scroll to "Install new print head?" and
press Enter/yes.
4. Open the top cover and locate print head.
5. Refer to the instructions that came with new print head to re-
move the old print head and install the new one.
6. Press Enter/yes to confirm the replacement. A print head initial-
ization occurs which lasts about 2-3 minutes.
7. When prompted, insert an envelope/tape sheet to print a test
pattern to confirm print quality.
8. If test pattern looks good, press Enter/yes.
Cleaning Printer Nozzles
Cleaning the printer nozzles may help you fix a printing problem.
1. Press Menu.
2. Use the Review keys to scroll to "Use ink functions?" and press
Enter/yes.
3. Use the Review keys to scroll to "Clean printer nozzles?" and
press Enter/yes. A "Preparing ink Please wait..." message dis-
plays as the machine performs its cleaning.
4. When prompted, insert an envelope or tape sheet into the machine.
5. At "Is test pattern OK" prompt, press Enter/yes.
6. When finished, follow prompts to return to main screen.