Filter
Top Products
NetEngine IAD User Guide
WAN Configuration 82
4. The IAD displays the ATM Encapsulation Configuration menu.
Figure 4–37. ATM Encapsulation Configuration Menu
Type the option for the encapsulation to configure for this PVC.
5. The IAD displays the ATM Service Category Configuration menu:
Figure 4–38. ATM Service Category Configuration Menu
Type 1 to select CBR for high priority data
—or—
Type 2 to select UBR for low priority data.
6. The IAD displays the ATM PCR Configuration menu.
Figure 4–39. ATM Peak Cell Rate Configuration Menu
*****************************************
ATM Encapsulation Configuration
*****************************************
Current Encapsulation: NONE
1. AAL5 (None)
2. AAL0 (None)
3. Proprietary Voice
4. RFC 1483 (using VC Muxing)
5. RFC 1483 (with LLC Encapsulation)
6. RFC 2364 (PPPoATM with LLC Encapsulation)
7. RFC 2364 (PPPoATM using VC Muxing)
NOTES
RFC 1483 using VC Muxing supports routing or bridging.
If you select RFC 2364 (PPPoATM with LLC Encapsulation)
or RFC 2364 (PPPoATM using VC Muxing), follow the on-
screen messages to set the PPP authorization type.When
complete, continue with step 7.
*****************************************
ATM Service Category Configuration
*****************************************
1. CBR
2. UBR
********************************************
ATM Peak Cell Rate (PCR) Configuration
********************************************
Current line speed for this interface is 2048000 bps
Please type a PCR value, or
Press ENTER to accept allowed maximum PCR value for
this line speed
Enter Peak Cell Rate (PCR) [4830 cells per second]: