Filter
Top Products
NetEngine IAD User Guide
Menu Map This appendix provide a map of the menu interface for the NetEngine
family of IADs.
A. Menu Map
Log On
Main Menu
ESC
(Log off)
(User ID/Password)
1. Reports
Menu
2. Configure
IP Router
3. Configure
Bridge
C. Display Current Config
N. Display Network Stats
I. Display Interface Stats
M.Display Media Stats
R. Display Route Table
A. Display ARP Table
B. Display Bridge Forwarding
Database
S. Display Bridge Status
P. Display PPP Authorization
Entries
U. Display System Uptime
O.Display Memory Statistics
A. Zero All Statistics
6. Configure
LAN*
1. 10 Mbps
Full Duplex
2. 10 Mbps
Half Duplex
3. 100 Mbps
Full Duplex
4. 100 Mbps
Half Duplex
5. Auto-negotiate
Full Duplex
6. Auto-negotiate
Half Duplex
7. Auto-negotiate
Speed &
Duplex Mode
5. Configure
WAN*
1. Configure
Datalink Protocol
2. Configure
Physical Interface
3. Configure
PVCs/DLCIs
4. Configure
ATM / FR Options
8. Configure
Login
1. Change User ID
2. Change User
Password
3. Change NetMan
Password*
4. Change Supervisor Password*
5. Change Primary RADIUS Server Address
6. Change Primary RADIUS Encrypt. Secret
7. Change Secondary RADIUS Server Addre
ss
8. Change Secondary RADIUS Encrypt. Secr
et
9. Display RADIUS Configuration
7. Configure
SNMP
E. Enable/Disable
SNMP via IP
F. Enable/Disable
SNMP via EOC
A|B. Enable/Disable
SNMP via IP & EOC
P. Configure System
Contact
N. Configure System
Name
L. Configure System
Location
C. Configure SNMP
Read/Write Comm.
T. Configure SNMP Trap Host IP Address
U. Enable/Disable SNMP Traps via EOC
D. Configure Restart Trap Max Delay
9. System
Utilities
Contact
Technical
Support
before using
this menu
C. Configure Port IP Address
U. Unconfigure Port IP Address
M.Configure Port Max Xmt Unit
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned
Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure CHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
Q. Configure IP Header Comp.
B. Configure LAN IP Bdcst Dest.
D. Display Route Table
G.Enable Bridging Globally
P. Enable Bridging by Port
A. Configure Bridge Aging Timer
T. Enable/Disable Spanning Tree Globally
O.Enable/Disable Spanning Tree by Port
R. Configure Spanning Tree Bridge Priority
Q.Configure Spanning Tree Port Priority
H. Configure Spanning Tree Hello Time
S. Configure Spanning Tree Max Age
F. Configure Spanning Tree Forward Delay
C. Configure Spanning Tree Path Cost
D. Delete Bridge Database Entry
* Requires a Supervisor password.