Filter
Top Products
NetEngine IAD User Guide
Command Line Interface 250
set lan rip Description. Enables or disables RIP on a WAN IP port If you do not enter
any optional parameters, the IAD performs the command against the first
available slot, interface and port.
set lan rip <on | off> <version (1 | 2Bcst | 2Mlti)>
(slot) (interface) (port)
on | off
Keyword to enable (on) or disable (off) RIP on the specified port.
version 1 | 2Bcst | 2Mlti
Keyword identifying version to implement. (Must be preceded by
keyword version)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (0 to 7)
set lan stp
bridge
Description. Enables or disables Spanning Tree Protocol on a LAN port.
set lan stp bridge <on | off> (slot) (interface) (port)
on | off
Keyword to enable (on) or disable (off) STP on the specified port.
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)
set mgcp
bracketing
Description. When communicating with the notified entity (call agent),
indicates whether the UDP port number should be wrapped in brackets for
compatibility.
set mgcp bracketing <on | off>
on | off
Keyword to enable (on) or disable (off) MGCP bracketing.