Filter
Top Products
NetEngine IAD User Guide
IAD Reports 218
Bridge Statistics Report
To display the Bridge Statistics report, type B on the Interface Statistics
menu. This report provides details about all packets sent and received on
the IAD bridge.
DLCI Statistics Report
To display the DLCI Statistics (Data Link Connection Identifier) report,
Type D on the Interface Statistics menu.
This option is only displayed when Frame Relay is selected as the data
link protocol.
Table 12–10.Bridge Statistics Report
Parameter Description
Received Packet Information
bridge packets received Total of bridge packet received from interface.
bridge octects received Total bridge octets/bytes received from interface.
discarded for lack of
resources
Discarded received packets due to lack of
resources: kernel memory or packet buffers.
bridge packets received
and discarded
Discarded received packets due to lack of packet
buffers or Spanning Tree packets arrived on an
interface, when Spanning Tree is not enabled.
bridge packets sent to one
other port
No. of bridge packets sent to a proper low-level
output port.
bridge packets sent to all
other ports
No. of bridge packets sent to all other bridge ports.
Sent Packet Information
bridge packets sent Total bridge packets sent.
bridge octects sent Total octets/bytes of bridge packets sent.
discarded for lack of
resources
Discarded transmitted packets due to lack of
resources (kernel memory, packet buffers, etc.)
Packets Received by Type
spanning tree config
packets received
No. of Spanning Tree Configuration packets
received.
spanning tree topology
change packets received
No. of Spanning Tree Topology Change packets
received.
spanning tree invalid
packets received
No. of invalid Spanning Tree packets, such as
Wrong LSAP, Control, Protocol ID, Version, Length,
and Message Type value.
spanning tree config
packets sent
No. of Spanning Tree Configuration packets sent.
spanning tree topology
change packets sent
No. of Spanning Tree Topology Change packets
sent.