Filter
Top Products
System Configuration Flags
Polycom®, Inc. 592
APACHE_KEEP_ALIVE_TIMEOU
T
If the connection is idle for longer than the number of seconds specified
by this flag, the connection to the Collaboration Server is terminated.
Value: 0 - 999
Default: 15
Note: A value of 0 results in an unlimited keep-alive duration.
AVOID_VIDEO_LOOP_BACK_IN
_CASCADE
When set to YES the current speaker’s image is not sent back through
the participant link in cascaded conferences with conference layouts
other than 1x1.
Default: YES
Range: YES / NO
BLOCK_CONTENT_LEGACY_F
OR_LYNC
This flag is used to control the system behavior in an environment
where some Lync clients use the Polycom CCS plug-in and some do
not.
When set to NO (default), Content is sent to all Lync clients over the
video channel, including those with the plug-in installed, even when the
Send Content to Legacy Endpoints is disabled. Other, non-Lync legacy
endpoints will not be affected by this flag and will receive content
according to the Send Content to Legacy Endpoints settings in the
conference Profile.
When set to YES, Content is not sent to Lync clients over the video
channel including those with the Polycom CCS plug-in installed, even
when the Send Content to Legacy Endpoints is enabled. Other,
non-Lync legacy endpoints will not be affected by this flag and will
receive content according to the Send Content to Legacy Endpoints
settings in the conference Profile.
CAC_ENABLE When set to YES, enables the Call Admission Control implementation
in the Collaboration Server.
Default: NO (CAC is disabled)
CASCADE_LINK_PLAY_TONE_
ON_CONNECTION
When set to YES, the RealPresence Collaboration Server plays a tone
when a cascading link between conferences is established. The tone is
played in both conferences.
This tone is not played when the cascading link disconnects from the
conferences.
The tone used to notify that the cascading link connection has been
established cannot be customized.
Default value: NO.
The tone volume is controlled by the same flag as the IVR messages
and tones: IVR_MESSAGE_VOLUME.
Manually Added, Modified, Deleted System Flags
Flag Description