Filter
Top Products
System Configuration Flags
Polycom®, Inc. 611
TC_LATENCY_SIZE This flag limits the latency (in milliseconds) or the number of bytes that
can be present in a queue.
Range: 1-1000 (in milliseconds).
TCP_RETRANSMISSION_TIME
OUT
The number of seconds the server will wait for a TCP client to answer a
call before closing the connection.
Default = 5 (seconds)
V35_ULTRA_SECURED_SUPPO
RT
This flag must be set to YES when deploying a Serial Gateway S4GW
in Ultra Secure Mode.
Note: Ultra Secure Mode is not supported by 800s and Virtual Edition
MCUs.
VSW_CIF_HP_THRESHOLD_BI
TRATE
Controls the Minimum Threshold Line Rate (kbps) for CIF resolution for
High Profile-enabled VSW conferences.
Default: 64
VSW_HD1080p_HP_THRESHOL
D_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for HD1080p
resolution for High Profile-enabled VSW conferences.
Default: 1024
VSW_HD720p30_HP_THRESHO
LD_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for HD720p30
resolution for High Profile-enabled VSW conferences.
Default: 512
VSW_HD720p50-60_HP_THRES
HOLD_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for HD720p50 and
HD720p50 resolutions for High Profile-enabled VSW conferences.
Default: 832
VSW_RATE_TOLERANCE_PER
ECENT
Determines the percentage of bandwidth that can be deducted from
the required bandwidth to allow participants to connect to the
conference.
For example, a value of 20 will allow a participant to connect to the
conference if the allocated line rate is up to 20% lower than the
conference line rate (or between 80% to 100% of the required
bandwidth).
Range: 0 - 75
Default: 0
VSW_SD_HP_THRESHOLD_BIT
RATE
Controls the Minimum Threshold Line Rate (kbps) for SD resolution for
High Profile-enabled VSW conferences.
Default: 128
WRONG_NUMBER_DIAL_
RETRIES
The number of re-dial attempts for a wrong destination number or a
wrong destination number time-out.
Range: 0 - 5
Default: 3
A flag value of 0 means that no redials are attempted.
Manually Added, Modified, Deleted System Flags
Flag Description