Filter
Top Products
System Configuration Flags
Polycom®, Inc. 603
MS_PROXY_REPLACE Enables the proxy=replace parameter in the SIP Header. When set to
YES the outbound proxy to replaces the contact information in the
contact header with its own enabling other clients and servers to reach
the client using the proxy's IP address, even if the client is behind a
firewall.
Possible Values: YES / NO
Default: YES
NETWORK_IND_CRITICAL_PER
CENTAGE
The percentage degradation due to packet loss required to change the
indicator from Major to Critical.
Default: 5
NETWORK_IND_MAJOR_PERC
ENTAGE
The percentage degradation due to packet loss required to change the
indicator from Normal to Major.
Default: 1
NUM_OF_INITIATE_HELLO_ME
SSAGE_IN_CALL_ESTABLISHM
ENT
Indicates how many times the Hello (keep alive) message is sent from
the Collaboration Server to the endpoint in an environment that
includes a Session Border Controller (SBC) with a 3-second interval
between messages.
Range: 1 to 10.
Default:3
NUM_OF_PCM_IN_MPMX In Collaboration Server 1500/2000/4000 systems with MPMx cards,
sets the maximum number of PCM sessions.
The default value of this flag is set according to the SVC license:
1 - If SVC is enabled in the license (the only possible value).
4 - If SVC is disabled in the license
Range: 1-4 (If SVC is disabled in the license).
NUMBER_OF_REDIAL Enter the number re dialing attempts required. Dialing may continue
until the conference is terminated.
Default: 3
OCSP_RESPONDER_TIMEOUT Determines the number of seconds the RMX is to wait for an OCSP
response from the OCSP Responder before failing the connection.
Network latency or slow WAN links can cause login problems when
logging in to the RMX’s Management Network.This System Flag’s
value determines the number of seconds the MCU is to wait for an
OCSP response from the OCSP Responder before failing the
connection.
Default: 3 (seconds)
Range: 1-20 (seconds)
Manually Added, Modified, Deleted System Flags
Flag Description