Filter
Top Products
System Configuration Flags
Polycom®, Inc. 606
REMOVE_EP_FROM_LAYOUTƒ
n_ON_NO_VIDEO_TIMER
Enables the removal of empty video cells from the Video Layout.
Range: 0 – 19 (seconds): The feature is disabled.
20 – 300 (seconds): The feature is enabled.
Default: 20
For more information, see Remove Empty Cells From the Video
Layout.
REMOVE_H323_EPC_CAP_TO_
NON_POLYCOM_VENDOR
Used to disable EPC protocol. Use of Polycom’s proprietary protocol,
High Profile, EPC, may result in interoperability issues when used with
other vendors’ endpoints.
Possible values: YES / NO
Default: NO
REMOVE_H323_HIGH_PROFILE
_CAP_TO_NON_POLYCOM_VE
NDOR
Used to disable High Profile protocol. Use of Polycom’s proprietary
protocol, High Profile, may result in interoperability issues when used
with other vendors’ endpoints.
Possible values: YES / NO
Default: NO
REMOVE_H323_HIGH_QUALITY
_AUDIO_CAP_TO_NON_POLYC
OM_VENDOR
Used to disable the following Audio Codecs:
• G7221C
• G7221
• Siren22
• Siren14
Possible values: YES / NO
Default: NO
REMOVE_H323_LPR_CAP_TO_
NON_POLYCOM_VENDOR
Used to disable H.323 LPR protocol. Use of Polycom’s proprietary
protocol, H.323 LPR, may result in interoperability issues when used
with other vendors’ endpoints.
Possible values: YES / NO
Default: NO
REMOVE_IP_IF_NUMBER_EXIS
TS
Between the time a conference is scheduled and when it becomes
active, the IP of an endpoint may change, especially in an environment
that uses DHCP. This flag determines if the E.164 number is to be
substituted for the IP address in the dial string.
Range: YES / NO
Default: YES - The IP address will be substituted with the E.164
number.
Manually Added, Modified, Deleted System Flags
Flag Description