Filter
Top Products
System Configuration Flags
Polycom®, Inc. 594
CPU_BONDING_MODE Sets the Bonding Mode of the Signalling and Management network
interface controllers.
Mode=6, balance-alb,
(Adaptive Load Balancing) includes balance-tlb, (Transmit Load
Balancing) and balance-rlb (Receive Load Balancing) for IPV4 traffic.
No special switch support is required.
Receive Load Balancing is achieved by ARP negotiation.
Outbound ARP Replies are intercepted and their source hardware
address is overwritten with the unique hardware address of one of the
slaves in the bond. In this way different peers will use different
hardware addresses for the server.
Note: balance-alb is the only supported value. All other possible values
are for troubleshooting purposes only.
Default: balance-alb
Possible values:
• balance-alb
• balance-rr
• active-backup
• balance-xor
• broadcast
• 802.3ad
• balance-tlb
DETECT_H323_EP_DISCONNE
CT_TIMER
Allows you to specify the amount of time the MCU waits before
disconnecting H.323 endpoint.
DETECT_SIP_EP_DISCONNEC
T _TIMER
The flag value indicates the amount of time in seconds to wait for an
RTCP or RTP message to be received from the endpoint. When the
time that was set in the system flag has elapsed and no RTCP or RTP
audio or video message has been received on either the audio or the
video channel, the MCU disconnects the SIP endpoint from the
conference.
Default: 20 (seconds)
Range: 0 - 300
For more information see Detecting SIP Endpoint Disconnection.
DISABLE_CELLS_NETWORK_IN
D
Disable the display of Network Quality Indicators displayed in the cells
of the conference Video Layout.
Default: YES
Range: YES / NO
DISABLE_DUMMY_REGISTRATI
ON
Enables or disables SIP dummy registration on the domain.
Possible Values:
NO (Default) - Disables SIP dummy registration.
YES - Enables SIP dummy registration.
Note: For homologation and certification testing, the flag must be set to
YES.
Manually Added, Modified, Deleted System Flags
Flag Description