Filter
Top Products
Perform Configuration
Quantum TC2201 User’s Guide 80
iSCSI
Configuration
3
This menu allows for setting the iSCSI configuration.
Table 14 iSCSI
Configuration Menu
•Select 1 to toggle authentication between Enabled and Disabled. The
default setting is Disabled. When set to Enabled, CHAP
authentication for iSCSI is enabled.
•Select 2 to configure CHAP authentication. This menu item appears
when menu item 3 above is toggled to Enabled. When this menu item
is selected, the names and secrets for CHAP authentication can be
configured. These settings must match the same settings on hosts that
need to log into the target devices. Host settings can be set in the
Microsoft iSCSI Initiator for Windows systems, or from the iSCSI
initiator available in Linux or other operating systems.
iSCSI Configuration Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
Authentication : Enabled
iSNS Client Option : Disabled
1) Toggle Authentication
2) Authentication Setup
3) Toggle iSNS Client
4) Change iSNS Server Settings
5) Portal Group Configuration
Command, <enter> for next iSCSI Port >