Filter
Top Products
Quantum TC201 User’s Guide 65
Appendix B
BInband SCSI-3
Commands
The TC2201 supports a set of SCSI-3 commands that can be
received inband over iSCSI. When received by the TC2201, these
commands are then executed by the TC2201 itself.
When using SCSI-3 commands to access general management
features, the commands can be sent to device LUNs that are
mapped through the TC2201.
The following is a list of the SCSI-3 commands that are supported
by the TC2201. Complete definitions of SCSI-3 commands can be
found in the SCSI-3 standard available from the American
National Standards Institute (ANSI).
General Commands 2
•REPORT LUNS
•INQUIRY