Filter
Top Products
Appendix B Inband SCSI-3 Commands
General Commands
Quantum TC201 User’s Guide 66
General Commands 2
Following is a description of a general-use SCSI-3 command. For more
information about the other general-use commands, please contact your
service representative.
Report LUNs Command 2
The TC2201 supports the Report LUNs command. The Report LUNs
command will return a list of Logical Unit Numbers (LUNs) that can
receive commands. The format of the report LUNs
command is shown in Table B-1.
Table 2 Format of Report LUNs
Command
Bit
Byte
7 6 5 4 3 2 1 0
0 Operation Code ( 0xA0)
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6 (MSB)
7 Allocation Length
8
9 (LSB)
10 Reserved
11 Control Byte
The TC2201 returns the LUN Parameters as defined in B-2.