Filter
Top Products
Perform Configuration
Quantum TC2201 User’s Guide 90
Device Mapping 3 This option allows the user to manipulate maps and associate selected
host with a particular map. Each physical port/bus on the system has at
least an Indexed map and Auto Assigned map. Each map has a unique
name and map ID. User may rename all maps, except for ‘Indexed’ and
‘Auto Assigned’. The map that is set to be current must always contain
valid information, since many of the operations on the map menu are
executed against this map.
Table 22 Device
Mapping Main Menu
• Changing Ports: When the iSCSI Portal Groups setting is configured
to use Both Ports, pressing the
Enter key will have no effect on this
menu. When the iSCSI Portal Groups setting is configured to use
separate ports, pressing the
Enter key will toggle between iSCSI Port
Device Mapping Main Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
Current Default Map for iSCSI Both Ports - Name 'Auto Assigned'
1) Select Current Map
2) Display Current Map
3) Add Map
4) Remove Current Map
5) Edit Current Map
6) Clone Current Map
7) Edit Host List
8) Display Device List
S) Save and Activate Mapping Changes
X) Return to previous menu
Command, <enter> for next portal group >