Chapter 2 TC2201 Web Interface
System Page
Quantum TC2201 User’s Guide 20
Real Time Clock
Configuration
2
This Real-Time Clock configuration page allows you to set up of the date
and time for the TC2201.
To access the Real-Time Clock page:
1 Click Real-Time Clock in the System menu.
The Real-Time Clock page displays (see figure 13):
Figure 14 Real-Time Clock Page
Note: In the event that either or both the user name and password
are forgotten, it is possible to reset the user name and
password to their default values by resetting the TC2201 to
factory defaults from the Command Line Interface using the
serial port (see appendix C
on page 71). Note that resetting to
factory defaults from the serial port will also reset all other
configuration settings to factory defaults, as well as erase all
current maps. It is recommended to capture a copy of the
system report (available from the System Utilities Menu) in
order to make reconfiguration easier.
