Perform Configuration
Quantum TC2201 User’s Guide 98
Table 32 Fill Current
Map
•Select 6 from the ‘Device Mapping Main Menu’ to clone ‘Current’
map. This option allows the user to make an exact copy of already
existing map complete with all entries. Cloning of ‘Auto Assigned’ is
not allowed. The new map must have a unique map id and name.
Once cloning is complete, the newly created map becomes ‘Current’
map. The purpose of this option is to create a base for a new map that
is similar to an already existing map.
Table 33 Clone
Current Map
Select 7 from the ‘Device Mapping Main Menu’ to edit the host list for the
current port/protocol. The ‘Current’ map can be associated with hosts
available in the host list on the same port where the map is defined.
Initially all hosts are associated with an Auto Assigned map.
The following is an example of an iSCSI host list:
Select fill priority (B=Bus/Target, T=Target/Bus, X=Cancel) > b
Fill Map function found 6 Unmapped Devices and mapped them to iSCSI
map 'Newer Map' for Portal Group: Both Ports.
Clone Current Map
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
CClone Map: iSCSI Portal Group: Both Ports - 'Newer Map'
Enter New Map Name (X=Cancel) > CloneMap
