Filter
Top Products
Chapter 2 TC2201 Web Interface
System Page
Quantum TC2201 User’s Guide 17
•Select Save to save the CHAP authentication changes. These
changes will become activated after the next time the TC2201
reboots.
iSCSI Portal Group Settings 2
The iSCSI portal group settings can be toggled between the following two
options:
• Use one portal group for both ports: By default, the TC2201 is set to
use one Portal Group for both ports, which enables failover capability
between the two iSCSI ports.
• Use separate portal groups for each port: This option disables failover
capability between the two iSCSI ports, so that each port can be
mapped separately.
iSCSI Portal Group Map Settings 2
• iSCSI Portal Group Map Settings allows selection of the default map(s)
to the current iSCSI portal group(s). Map selections include Auto
Assigned and Indexed.
• Once all changes are made, select the Submit button to send the
changes to the TC2201. Changes will become activated after the
next time the TC2201 reboots.
iSNS Settings 2 This page allows for configuration the iSNS settings for the TC2201.
To access the iSNS Settings page:
1 Click iSNS Settings in the System menu.
The iSNS Settings page displays (see figure 12):