Filter
Top Products
Perform Configuration
Quantum TC2201 User’s Guide 86
Table 19 SCSI
Initiator Menu
Following are descriptions for each of the settings:
•Select 1 to select the primary SCSI Initiator ID. This is the ID for the
SCSI device that request operations from other SCSI devices known
as targets. This should be a unique ID on the bus. The default setting
is 7. The user must enter a integer value in the range of 0-15 prior to
saving the configuration to the TC2201.
•Select 2 to enable/disable an alternate SCSI Initiator ID.
•Select 3 to select an alternate SCSI Initiator ID. This should be a
unique ID on the bus. The default value is 6. This option is used to
enhance the performance of status (“agent”) commands issued to a
serial device.
SCSI Intiator Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
Current Initiator Configuration - Bus 0
Initiator ID : 07
1) Select primary SCSI Initiator ID
2) Enable/Disable alternate SCSI ID
(The “alternate” ID is used to enhance the performance
of status (“agent”) commands that are being issued to a
serial device. To use this feature enable the alternate
ID and pick an ID that is currently unused on this bus.)
3) Select alternate SCSI Initiator ID
X) Return to previous menu