Filter
Top Products
15
A LOOK AT THE KEYPAD
If your scanner’s keys seem
confusing at first, the following
information should help you
understand each key’s function.Ô
FUNC — Lets you use various
functions by pressing this key in
combination with other keys.
When using the FUNC key, press
FUNC first, then release it, then
quickly press the next key in the
function key sequence.
Hold down for about 2 seconds,
the scanner enters function menu
mode.
õ/î — Locks and unlocks the
keypad to prevent accidental
entries; turns the backlight on and
off.
^ — Moves through car numbers
or channels. Or, enters the tune
mode (from channel display
mode).
v — Moves through car numbers
or channels. Or, enters the tune
mode (from channel display
mode).
> — Moves through frequencies in
the same car number. Or, you can
change the car number.
< — Enters the text input mode or
CTCSS setting mode.
CAR/CAR/CH — Enter the car
number you want to listen. Or,
changes between car number
display mode and channel number
display mode.
Ô NOTE Ô
Some of the scanner’s
keys perform more than
one function and are
marked with more than
one label. The steps in
this Owner’s Manual
show only the label on
the key appropriate to
the action being
performed.
20-515Change01_04.fm Page 15 Friday, January 16, 2004 1:14 PM