Filter
Top Products
35
Channel Storage Banks Off and
On” on Page 35 and “Locking Out
Channels or Frequencies” on
Page 51).
Turning Channel Storage
Banks Off and On
To turn off channel storage banks
while scanning, press the bank's
number key so the bank's number
disappears. For example, to turn
off bank 1, press
1. The scanner
does not scan any of the channels
within the banks you turned off.
To turn on channel storage banks
while scanning, press the number
key until the bank's number
appears. For example to turn bank
1 on again, press
1.
You cannot turn off all channel
storage banks. There must be at
least one active channel storage
bank.
You can manually select any
channel in a channel storage
bank, even if the bank is turned
off.
Monitoring a Single
Channel
You can monitor a single channel
with your scanner by navigating to
that channel while in manual
mode. The scanner will receive
traffic on the selected frequency.
To monitor a single channel,
repeatedly press
SCAN during
conventional channel operation.
MAN appears.
20-515Change01_04.fm Page 35 Friday, January 16, 2004 1:14 PM