Filter
Top Products
25
and frequency are stored in
an available channel.
To program another
frequency in the same car
number, press ^ or
v to recall
0.00000 MHz then repeat
Step 3.
When you finish
programming, press
CAR
twice.
Adding Frequencies To a
Car Number
1. Select the car number that
you want to add the frequency
by using
CAR and the number
keys.
2. Press FUNC then
v. P.Fr and
0.00000 MHz appears.
3. Enter the frequency (including
the decimal point) you want to
associate with the displayed
car number by using the
number keys and ./CLEAR.
4. Press ENT to store the
frequency. The frequency is
associated with the car
number entered.
Adding a Car Number to
the Channel
You can assign the car number
after you program the frequency
into the channel.Ô
1. Enter the normal car number
operation mode.
2. Press
FUNC, and then ^ to
recall the frequency without
car number. The scanner
shows
C.Fr (Call Frequency)
Ô NOTES Ô
When the scanner is not
programmed with
frequencies without the
car number, the scanner
sound an error tone.
20-515Change01_04.fm Page 25 Friday, January 16, 2004 1:14 PM