Filter
Top Products
26
Car# - - - at the top line. Then
press ^ or
v to select the
frequency that you want to
add a car number.Ô
3. Press FUNC the press >.
4. Enter the car number by using
the number keys. If you enter
1 or 2 digit, press
ENT.
Viewing Frequencies
Associated With a Car
Number
1. Repeatedly press CAR until
Input Car#? appears.
2. Enter the car number. Then
press
CAR. One of the car
number's frequencies
appears.Ô
3. Repeatedly press >. This
operation skips locked out
frequencies.
If you want to move to another car
number frequency, press ^ or v.
Removing a Frequency
From a Car Number
1. Recall a car number
frequency using
CAR, the
number key and >.
2. Press
SCAN. A.Fr appears.
3. Press
0.
4. Press
ENT.
A.Fr (All Frequency)
Mode (In Car Number
Operation)
You can recall all conventional
channel frequencies in this mode
Ô NOTES Ô
• If the car number is
three digits, you must
not press CAR.
• When the specified
car number is not
programmed, the
scanner shows
0.00000 MHz.
• When the specified
car number was set
to lockout, Locked out
appears, the scanner
shows A.Fr (All
Frequency mode),
the car number and
the frequency.
20-515Change01_04.fm Page 26 Friday, January 16, 2004 1:14 PM