Filter
Top Products
CHAPTER 2: OPERATION 25
6. Click the First Channel drop-down arrow and select the channel number that will be able to
activate video outputs of other channels when it is accessed.
7. Click the Second Channel drop-down arrow and select the channel number whose video
output will be activated when the first channel is accessed.
8. Repeat step 7 for Third and Fourth Channel if you choose “Quad Screens” in Step 5.
9. Choose the desired action(s) from the following:
• Click OK to save changes and exit the dialog.
• Click Apply to save changes without exiting the dialog.
• To exit the dialog without saving any changes, click Close.
• If you want to create more association groups, repeat steps 2 to 9 to complete each
association setting.
Editing an Association Group
You can modify any existing association group to meet your needs instead of creating a new
association group from scratch.
1. Choose Setup > Multiple Video. The Add Multiple Port Association dialog appears.
2. Click the association group that you want to edit from the list on the lower part of the dialog.
Figure 25 Add Multiple Port Association Dialog – Edit Data
3. (Optional) If you want to change the total number of channels, click the Viewing Mode drop-
down arrow and select the appropriate option.
4. Change the channel configuration.
5. Click Apply to save the changes, or Close to exit the dialog without saving any changes.
Deleting an Association Group
You can remove any unnecessary or obsolete association group from the list.
1. Choose Setup > Multiple Video. The Add Multiple Port Association dialog appears.