Filter
Top Products
28 PARAGON MANAGER USER GUIDE
Figure 28 Configure Routers Dialog
2. Click New to start adding a router.
3. Type the NV5128 router’s IP address in the IP Address field.
4. Ensure the TCP Port Number field displays 5194.
Important: Do
not
change the TCP port number, or Paragon Manager cannot
control the NV5128 router.
5. Type a name in the Router Name field for identifying the router.
6. (Optional) Type any descriptive text in the Description field.
7. Do one of these:
• Click Apply to save the changes and the router setting is displayed in the table to the
right. Repeat Steps 1 to 7 if you want to add more NV5128 routers.
• Click OK to save the changes and quit the dialog.
• Click Close to quit the dialog without saving the changes.
Editing NV5128 Router Settings
You can change existing router settings if IP address of any NV5128 router has been changed or
is incorrect.
1. Choose Router > Configure Routers. The Configure Routers dialog appears.
2. Click the row containing the router settings that you want to change in the table. The
highlighted router’s settings are all displayed in the fields to the left.
Figure 29 Router Settings
3. Change any field you want except for the Router Name field.
4. Do one of these:
• Click Apply to save the changes, and then the changes are reflected in the table. Repeat
Steps 1 to 4 if you want to edit more NV5128 router settings.
• Click OK to save the changes and quit the dialog.
• Click Close to quit the dialog without saving the changes.