Filter
Top Products
APPENDIX A: CLIENT SOFTWARE FOR PARAGON II SYSTEM CONTROLLER 41
Create and Property (Users Menu)
The functions of the “Create” and “Property” commands are similar to those of Paragon Manager.
Only two points are different:
• P2SC does not support the Forced Video function so the configuration of “Allow Forced
Video Privileges” is not available.
• “Green Mode” performs power-saving function as the “Sleep Mode” in Paragon Manager,
but in P2SC it offers only two options: ON and OFF, instead of three options as Paragon
Manager.
− ON will activate the power-saving mode when the mouse/keyboard activity is idle for the
time (minutes) specified under “Green Mode.”
− Choosing OFF will never activate the power-saving mode.
Figure 43 P2SC – Add User Dialog
Exclusive Features in P2SC
Those features specific to P2SC Admin are described below.
RFT_Update (Setup Menu)
The “RFT_Update” command updates the P2SC firmware. Before updating the firmware, you
must download the latest P2SC firmware from the Firmware and Documentation webpage on
Raritan’s website at: http://www.raritan.com/support/firmware-and-documentation/
. Then do the
following:
1. Choose RFT_Update from the Setup drop-down menu.
2. A message box appears, asking you to confirm the RFT update action. Click Yes.
3. The Select RFP File dialog appears. Choose the appropriate file and click Open.
Base UMT’s (Setup Menu)
This command is to determine which and how many Paragon switches are managed by P2SC. A
P2SC can control up to 8 Paragon II Base Units.