Filter
Top Products
36 PARAGON MANAGER USER GUIDE
Click Save to store the current list of devices so next time when you execute the Paragon
Update utility, the same list appears and saves your time re-entering the same information.
Note: The devices checked (
3
) on the list must all belong to the same type. For example,
either all of them are Paragon switches or all are user stations.
5. Select the checkboxes of the devices whose firmware you want to upgrade. OR click Select
All to check all checkboxes.
Figure 35 Paragon Update – Check All
6. Click Load Hex File. The Open dialog appears.
7. Navigate to where the desired firmware file (*.hex) is located, select it and click Open.
8. (Optional) Click Check Device Information and then Yes to verify whether the firmware
version is designed for the Paragon model you are going to upgrade. The Paragon Device
and File Version Information window appears; click OK to exit. If the firmware file is
suitable for updating your device, you will be returned to Paragon Update dialog. Otherwise,
a warning message is displayed.
Figure 36 Paragon Device and File Version Information Window