Filter
Top Products
Installation 5-8
II L 00
8) If printed-paper have “dog-eared corners”, check the next item.
Because paper may touch a tip of entrance paper guide.
(1) Check which of “Disable”, “Enable” and “Auto select” the de-curler function of the container stacker
selects in OCP.
(2) Install the container stacker slightly than the printer above.
Check the mark position of front side and the mark frame of rear side, and adjust the leveling bolt.
(3) Check contact condition of the feeding paper and tip of entrance paper guide on container stacker,
when the container’s de-curler function selects “Disable”.
(4) Check contact condition of the feeding paper and tip of entrance paper guide on container stacker,
when the container’s de-curler function selects “Enable”.
(5) If printed-paper have “dog-eared corners”, readjust the height of the container stacker in a leveling
bolt, and repeat work (3), (4).
(6) Return to original de-curler function of container stacker selects in OCP.
Details of connection part at front
Entrance paper guide
Mark position
Upper
Upper
Details of connection part at rear
Mark frame
Upper