Filter
Top Products
Preparation for Installation 4-38
II L 00
5) Install the Standard Finisher to the Container Stacker 2.
M4 screws
Container stacker 2
Standard finisher
M4 screws
Finisher paper
guide
Adjust the gap in parallel.
A
0 to 3 mm
Adjustment bolt
Adjust a difference between the paper guide of stacker side and printer side by 0-3 mm.
Check the Gaps of A, B, C, D are nearly equal each other.
If they are not, re-adjust by adjusting leveling bolts.
CHECK
Container stacker 2 paper guide
Loosen