Filter
Top Products
Unpacking 2-11
II L 00
2.3 Unpacking of the High Capacity Hopper
1) Perform unpacking where there is no dust or water leaking.
2) Do not place heavy objects which weight 5 kg or more on device.
3) Observe the speed limit of 300 mm/sec. (1.08 km/hr) when moving
device. Do not move device on unleveled floor. Do not tilt device 15 ° or
more.
4) Choose the location to place device where the slope is less than 15 °.
(Only left and right direction from view of operator’s side.)
5) Choose the location to place device where there is no condensation.
2.3.1 Confirmation of Parts Quantities
Table 2.6 Components in the package
Unit of Packing Quantity
High Capacity Hopper 1
2.3.2 Unpacking Procedures
1) Cut the V Bands and remove the Cap.
WARNING
Cap