Filter
Top Products
Preparation for Installation 4-25
II L 00
5) Install the 2000 Sheets Hopper.
6) Remove the two M3x8 Screws and Electrostatic Eraser from the Engine.
7) Install the Guide plate (U) with the Electrostatic Eraser (“FRONT” letter is surface.) by using
the two M3x8 Screws. (Be careful that the hair of the Electrostatic Eraser does not fall.)
8) Install the Guide plate (L) by using the two M3x8 Screws with washer.
9) Install the Joint Bracket (U) and Joint Bracket (L) by using the two M4x8 Screws.
M4x8 Screw
M4x8 Screw
Joint bracket (L)
Joint bracket (U)
M3x8 Screw with washer
Guide plate (U)
Guide plate (L)
Static electricity eliminator
M3x8 Screw
M4 Screw
2000 Sheets Hopper
Guide Plate (L)
view from front side.
Guide Plate (U)
view from front side.