Filter
Top Products
Copying
112
2
To program the user stamp
This function scans an image that is used as a user stamp.
The range of stamp images for readability is 10–297 mm (0.4”-11.7”) high and
10–432 mm (0.4”-17.0”) wide. However, if the value exceeds the maximum value
of the area (5,000 mm
2
, 7.75 inch
2
), it is corrected within the range of the area au-
tomatically.
A Make sure that the machine is in copier mode.
B Press the {User Tools/Counter} key.
C Press [Copier / Document Server Features].
D Press [Stamp].
E Press [User Stamp].
F Press [Program / Delete Stamp].
G Press [mProgram], and then press the stamp number you want to program.
H Enter the user stamp name (up to ten characters) with the letter keys, and
then press [OK].
I Enter the horizontal size of the stamp with the number keys, and then press
{q} key.
J Press [Vertical], and then enter the vertical size of the stamp with the number
keys, and then press {q} key.
AMG041S